Struct zebrad::components::mempool::downloads::Downloads

source ·
pub struct Downloads<ZN, ZV, ZS>
where ZN: Service<Request, Response = Response, Error = Box<dyn Error + Send + Sync + 'static>> + Send + Clone + 'static, ZN::Future: Send, ZV: Service<Request, Response = Response, Error = Box<dyn Error + Send + Sync + 'static>> + Send + Clone + 'static, ZV::Future: Send, ZS: Service<Request, Response = Response, Error = Box<dyn Error + Send + Sync + 'static>> + Send + Clone + 'static, ZS::Future: Send,
{ network: ZN, verifier: ZV, state: ZS, pending: FuturesUnordered<JoinHandle<Result<(VerifiedUnminedTx, Vec<OutPoint>, Option<Height>), (TransactionDownloadVerifyError, UnminedTxId)>>>, cancel_handles: HashMap<UnminedTxId, (Sender<CancelDownloadAndVerify>, Gossip)>, }
Expand description

Represents a [Stream] of download and verification tasks.

Fields§

§network: ZN

A service that forwards requests to connected peers, and returns their responses.

§verifier: ZV

A service that verifies downloaded transactions.

§state: ZS

A service that manages cached blockchain state.

§pending: FuturesUnordered<JoinHandle<Result<(VerifiedUnminedTx, Vec<OutPoint>, Option<Height>), (TransactionDownloadVerifyError, UnminedTxId)>>>

A list of pending transaction download and verify tasks.

§cancel_handles: HashMap<UnminedTxId, (Sender<CancelDownloadAndVerify>, Gossip)>

A list of channels that can be used to cancel pending transaction download and verify tasks. Each channel also has the corresponding request.

Implementations§

source§

impl<ZN, ZV, ZS> Downloads<ZN, ZV, ZS>
where ZN: Service<Request, Response = Response, Error = Box<dyn Error + Send + Sync + 'static>> + Send + Clone + 'static, ZN::Future: Send, ZV: Service<Request, Response = Response, Error = Box<dyn Error + Send + Sync + 'static>> + Send + Clone + 'static, ZV::Future: Send, ZS: Service<Request, Response = Response, Error = Box<dyn Error + Send + Sync + 'static>> + Send + Clone + 'static, ZS::Future: Send,

source

pub(crate) fn project<'pin>( self: Pin<&'pin mut Self>, ) -> __DownloadsProjection<'pin, ZN, ZV, ZS>

source

pub(crate) fn project_ref<'pin>( self: Pin<&'pin Self>, ) -> __DownloadsProjectionRef<'pin, ZN, ZV, ZS>

source§

impl<ZN, ZV, ZS> Downloads<ZN, ZV, ZS>
where ZN: Service<Request, Response = Response, Error = Box<dyn Error + Send + Sync + 'static>> + Send + Clone + 'static, ZN::Future: Send, ZV: Service<Request, Response = Response, Error = Box<dyn Error + Send + Sync + 'static>> + Send + Clone + 'static, ZV::Future: Send, ZS: Service<Request, Response = Response, Error = Box<dyn Error + Send + Sync + 'static>> + Send + Clone + 'static, ZS::Future: Send,

source

pub fn new(network: ZN, verifier: ZV, state: ZS) -> Self

Initialize a new download stream with the provided services.

network is used to download transactions. verifier is used to verify transactions. state is used to check if transactions are already in the state.

The Downloads stream is agnostic to the network policy, so retry and timeout limits should be applied to the network service passed into this constructor.

source

pub fn download_if_needed_and_verify( &mut self, gossiped_tx: Gossip, rsp_tx: Option<Sender<Result<(), Box<dyn Error + Send + Sync + 'static>>>>, ) -> Result<(), MempoolError>

Queue a transaction for download (if needed) and verification.

Returns the action taken in response to the queue request.

source

pub fn cancel(&mut self, mined_ids: &HashSet<Hash>)

Cancel download/verification tasks of transactions with the given transaction hash (see UnminedTxId::mined_id).

source

pub fn cancel_all(&mut self)

Cancel all running tasks and reset the downloader state.

source

pub fn in_flight(&self) -> usize

Get the number of currently in-flight download tasks.

source

pub fn transaction_requests(&self) -> impl Iterator<Item = &Gossip>

Get a list of the currently pending transaction requests.

source

async fn transaction_in_best_chain( state: &mut ZS, txid: UnminedTxId, ) -> Result<(), TransactionDownloadVerifyError>

Check if transaction is already in the best chain.

Trait Implementations§

source§

impl<ZN, ZV, ZS> Debug for Downloads<ZN, ZV, ZS>
where ZN: Service<Request, Response = Response, Error = Box<dyn Error + Send + Sync + 'static>> + Send + Clone + 'static + Debug, ZN::Future: Send, ZV: Service<Request, Response = Response, Error = Box<dyn Error + Send + Sync + 'static>> + Send + Clone + 'static + Debug, ZV::Future: Send, ZS: Service<Request, Response = Response, Error = Box<dyn Error + Send + Sync + 'static>> + Send + Clone + 'static + Debug, ZS::Future: Send,

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl<ZN, ZV, ZS> Drop for Downloads<ZN, ZV, ZS>
where ZN: Service<Request, Response = Response, Error = Box<dyn Error + Send + Sync + 'static>> + Send + Clone + 'static, ZN::Future: Send, ZV: Service<Request, Response = Response, Error = Box<dyn Error + Send + Sync + 'static>> + Send + Clone + 'static, ZV::Future: Send, ZS: Service<Request, Response = Response, Error = Box<dyn Error + Send + Sync + 'static>> + Send + Clone + 'static, ZS::Future: Send,

source§

fn drop(&mut self)

Executes the destructor for this type. Read more
source§

impl<ZN, ZV, ZS> Stream for Downloads<ZN, ZV, ZS>
where ZN: Service<Request, Response = Response, Error = Box<dyn Error + Send + Sync + 'static>> + Send + Clone + 'static, ZN::Future: Send, ZV: Service<Request, Response = Response, Error = Box<dyn Error + Send + Sync + 'static>> + Send + Clone + 'static, ZV::Future: Send, ZS: Service<Request, Response = Response, Error = Box<dyn Error + Send + Sync + 'static>> + Send + Clone + 'static, ZS::Future: Send,

source§

type Item = Result<(VerifiedUnminedTx, Vec<OutPoint>, Option<Height>), (UnminedTxId, TransactionDownloadVerifyError)>

Values yielded by the stream.
source§

fn poll_next( self: Pin<&mut Self>, cx: &mut Context<'_>, ) -> Poll<Option<Self::Item>>

Attempt to pull out the next value of this stream, registering the current task for wakeup if the value is not yet available, and returning None if the stream is exhausted. Read more
source§

fn size_hint(&self) -> (usize, Option<usize>)

Returns the bounds on the remaining length of the stream. Read more
source§

impl<'pin, ZN, ZV, ZS> Unpin for Downloads<ZN, ZV, ZS>
where ZN: Service<Request, Response = Response, Error = Box<dyn Error + Send + Sync + 'static>> + Send + Clone + 'static, ZN::Future: Send, ZV: Service<Request, Response = Response, Error = Box<dyn Error + Send + Sync + 'static>> + Send + Clone + 'static, ZV::Future: Send, ZS: Service<Request, Response = Response, Error = Box<dyn Error + Send + Sync + 'static>> + Send + Clone + 'static, ZS::Future: Send, PinnedFieldsOf<__Downloads<'pin, ZN, ZV, ZS>>: Unpin,

Auto Trait Implementations§

§

impl<ZN, ZV, ZS> !Freeze for Downloads<ZN, ZV, ZS>

§

impl<ZN, ZV, ZS> !RefUnwindSafe for Downloads<ZN, ZV, ZS>

§

impl<ZN, ZV, ZS> Send for Downloads<ZN, ZV, ZS>

§

impl<ZN, ZV, ZS> Sync for Downloads<ZN, ZV, ZS>
where ZN: Sync, ZV: Sync, ZS: Sync,

§

impl<ZN, ZV, ZS> !UnwindSafe for Downloads<ZN, ZV, ZS>

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
§

impl<T> AsAny for T
where T: Any,

§

fn as_any(&self) -> &(dyn Any + 'static)

Borrow this concrete type as a &dyn Any
§

fn as_mut_any(&mut self) -> &mut (dyn Any + 'static)

Borrow this concrete type as a &mut dyn Any
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<T> Conv for T

§

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more
§

impl<T> FmtForward for T

§

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
§

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
§

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
§

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
§

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoEither for T

source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

impl<T> IntoRequest<T> for T

source§

fn into_request(self) -> Request<T>

Wrap the input message T in a tonic::Request
source§

impl<T> IntoStreamingRequest for T
where T: Stream + Send + 'static,

source§

type Stream = T

The RPC request stream type
source§

type Message = <T as Stream>::Item

The RPC request type
source§

fn into_streaming_request(self) -> Request<T>

Wrap the stream of messages in a tonic::Request
§

impl<D> OwoColorize for D

§

fn fg<C>(&self) -> FgColorDisplay<'_, C, Self>
where C: Color,

Set the foreground color generically Read more
§

fn bg<C>(&self) -> BgColorDisplay<'_, C, Self>
where C: Color,

Set the background color generically. Read more
§

fn black<'a>(&'a self) -> FgColorDisplay<'a, Black, Self>

Change the foreground color to black
§

fn on_black<'a>(&'a self) -> BgColorDisplay<'a, Black, Self>

Change the background color to black
§

fn red<'a>(&'a self) -> FgColorDisplay<'a, Red, Self>

Change the foreground color to red
§

fn on_red<'a>(&'a self) -> BgColorDisplay<'a, Red, Self>

Change the background color to red
§

fn green<'a>(&'a self) -> FgColorDisplay<'a, Green, Self>

Change the foreground color to green
§

fn on_green<'a>(&'a self) -> BgColorDisplay<'a, Green, Self>

Change the background color to green
§

fn yellow<'a>(&'a self) -> FgColorDisplay<'a, Yellow, Self>

Change the foreground color to yellow
§

fn on_yellow<'a>(&'a self) -> BgColorDisplay<'a, Yellow, Self>

Change the background color to yellow
§

fn blue<'a>(&'a self) -> FgColorDisplay<'a, Blue, Self>

Change the foreground color to blue
§

fn on_blue<'a>(&'a self) -> BgColorDisplay<'a, Blue, Self>

Change the background color to blue
§

fn magenta<'a>(&'a self) -> FgColorDisplay<'a, Magenta, Self>

Change the foreground color to magenta
§

fn on_magenta<'a>(&'a self) -> BgColorDisplay<'a, Magenta, Self>

Change the background color to magenta
§

fn purple<'a>(&'a self) -> FgColorDisplay<'a, Magenta, Self>

Change the foreground color to purple
§

fn on_purple<'a>(&'a self) -> BgColorDisplay<'a, Magenta, Self>

Change the background color to purple
§

fn cyan<'a>(&'a self) -> FgColorDisplay<'a, Cyan, Self>

Change the foreground color to cyan
§

fn on_cyan<'a>(&'a self) -> BgColorDisplay<'a, Cyan, Self>

Change the background color to cyan
§

fn white<'a>(&'a self) -> FgColorDisplay<'a, White, Self>

Change the foreground color to white
§

fn on_white<'a>(&'a self) -> BgColorDisplay<'a, White, Self>

Change the background color to white
§

fn default_color<'a>(&'a self) -> FgColorDisplay<'a, Default, Self>

Change the foreground color to the terminal default
§

fn on_default_color<'a>(&'a self) -> BgColorDisplay<'a, Default, Self>

Change the background color to the terminal default
§

fn bright_black<'a>(&'a self) -> FgColorDisplay<'a, BrightBlack, Self>

Change the foreground color to bright black
§

fn on_bright_black<'a>(&'a self) -> BgColorDisplay<'a, BrightBlack, Self>

Change the background color to bright black
§

fn bright_red<'a>(&'a self) -> FgColorDisplay<'a, BrightRed, Self>

Change the foreground color to bright red
§

fn on_bright_red<'a>(&'a self) -> BgColorDisplay<'a, BrightRed, Self>

Change the background color to bright red
§

fn bright_green<'a>(&'a self) -> FgColorDisplay<'a, BrightGreen, Self>

Change the foreground color to bright green
§

fn on_bright_green<'a>(&'a self) -> BgColorDisplay<'a, BrightGreen, Self>

Change the background color to bright green
§

fn bright_yellow<'a>(&'a self) -> FgColorDisplay<'a, BrightYellow, Self>

Change the foreground color to bright yellow
§

fn on_bright_yellow<'a>(&'a self) -> BgColorDisplay<'a, BrightYellow, Self>

Change the background color to bright yellow
§

fn bright_blue<'a>(&'a self) -> FgColorDisplay<'a, BrightBlue, Self>

Change the foreground color to bright blue
§

fn on_bright_blue<'a>(&'a self) -> BgColorDisplay<'a, BrightBlue, Self>

Change the background color to bright blue
§

fn bright_magenta<'a>(&'a self) -> FgColorDisplay<'a, BrightMagenta, Self>

Change the foreground color to bright magenta
§

fn on_bright_magenta<'a>(&'a self) -> BgColorDisplay<'a, BrightMagenta, Self>

Change the background color to bright magenta
§

fn bright_purple<'a>(&'a self) -> FgColorDisplay<'a, BrightMagenta, Self>

Change the foreground color to bright purple
§

fn on_bright_purple<'a>(&'a self) -> BgColorDisplay<'a, BrightMagenta, Self>

Change the background color to bright purple
§

fn bright_cyan<'a>(&'a self) -> FgColorDisplay<'a, BrightCyan, Self>

Change the foreground color to bright cyan
§

fn on_bright_cyan<'a>(&'a self) -> BgColorDisplay<'a, BrightCyan, Self>

Change the background color to bright cyan
§

fn bright_white<'a>(&'a self) -> FgColorDisplay<'a, BrightWhite, Self>

Change the foreground color to bright white
§

fn on_bright_white<'a>(&'a self) -> BgColorDisplay<'a, BrightWhite, Self>

Change the background color to bright white
§

fn bold<'a>(&'a self) -> BoldDisplay<'a, Self>

Make the text bold
§

fn dimmed<'a>(&'a self) -> DimDisplay<'a, Self>

Make the text dim
§

fn italic<'a>(&'a self) -> ItalicDisplay<'a, Self>

Make the text italicized
§

fn underline<'a>(&'a self) -> UnderlineDisplay<'a, Self>

Make the text italicized
Make the text blink
Make the text blink (but fast!)
§

fn reversed<'a>(&'a self) -> ReversedDisplay<'a, Self>

Swap the foreground and background colors
§

fn hidden<'a>(&'a self) -> HiddenDisplay<'a, Self>

Hide the text
§

fn strikethrough<'a>(&'a self) -> StrikeThroughDisplay<'a, Self>

Cross out the text
§

fn color<Color>(&self, color: Color) -> FgDynColorDisplay<'_, Color, Self>
where Color: DynColor,

Set the foreground color at runtime. Only use if you do not know which color will be used at compile-time. If the color is constant, use either OwoColorize::fg or a color-specific method, such as OwoColorize::green, Read more
§

fn on_color<Color>(&self, color: Color) -> BgDynColorDisplay<'_, Color, Self>
where Color: DynColor,

Set the background color at runtime. Only use if you do not know what color to use at compile-time. If the color is constant, use either OwoColorize::bg or a color-specific method, such as OwoColorize::on_yellow, Read more
§

fn fg_rgb<const R: u8, const G: u8, const B: u8>( &self, ) -> FgColorDisplay<'_, CustomColor<R, G, B>, Self>

Set the foreground color to a specific RGB value.
§

fn bg_rgb<const R: u8, const G: u8, const B: u8>( &self, ) -> BgColorDisplay<'_, CustomColor<R, G, B>, Self>

Set the background color to a specific RGB value.
§

fn truecolor(&self, r: u8, g: u8, b: u8) -> FgDynColorDisplay<'_, Rgb, Self>

Sets the foreground color to an RGB value.
§

fn on_truecolor(&self, r: u8, g: u8, b: u8) -> BgDynColorDisplay<'_, Rgb, Self>

Sets the background color to an RGB value.
§

fn style(&self, style: Style) -> Styled<&Self>

Apply a runtime-determined style
§

impl<D> OwoColorize for D

§

fn fg<C>(&self) -> FgColorDisplay<'_, C, Self>
where C: Color,

Set the foreground color generically Read more
§

fn bg<C>(&self) -> BgColorDisplay<'_, C, Self>
where C: Color,

Set the background color generically. Read more
§

fn black(&self) -> FgColorDisplay<'_, Black, Self>

Change the foreground color to black
§

fn on_black(&self) -> BgColorDisplay<'_, Black, Self>

Change the background color to black
§

fn red(&self) -> FgColorDisplay<'_, Red, Self>

Change the foreground color to red
§

fn on_red(&self) -> BgColorDisplay<'_, Red, Self>

Change the background color to red
§

fn green(&self) -> FgColorDisplay<'_, Green, Self>

Change the foreground color to green
§

fn on_green(&self) -> BgColorDisplay<'_, Green, Self>

Change the background color to green
§

fn yellow(&self) -> FgColorDisplay<'_, Yellow, Self>

Change the foreground color to yellow
§

fn on_yellow(&self) -> BgColorDisplay<'_, Yellow, Self>

Change the background color to yellow
§

fn blue(&self) -> FgColorDisplay<'_, Blue, Self>

Change the foreground color to blue
§

fn on_blue(&self) -> BgColorDisplay<'_, Blue, Self>

Change the background color to blue
§

fn magenta(&self) -> FgColorDisplay<'_, Magenta, Self>

Change the foreground color to magenta
§

fn on_magenta(&self) -> BgColorDisplay<'_, Magenta, Self>

Change the background color to magenta
§

fn purple(&self) -> FgColorDisplay<'_, Magenta, Self>

Change the foreground color to purple
§

fn on_purple(&self) -> BgColorDisplay<'_, Magenta, Self>

Change the background color to purple
§

fn cyan(&self) -> FgColorDisplay<'_, Cyan, Self>

Change the foreground color to cyan
§

fn on_cyan(&self) -> BgColorDisplay<'_, Cyan, Self>

Change the background color to cyan
§

fn white(&self) -> FgColorDisplay<'_, White, Self>

Change the foreground color to white
§

fn on_white(&self) -> BgColorDisplay<'_, White, Self>

Change the background color to white
§

fn default_color(&self) -> FgColorDisplay<'_, Default, Self>

Change the foreground color to the terminal default
§

fn on_default_color(&self) -> BgColorDisplay<'_, Default, Self>

Change the background color to the terminal default
§

fn bright_black(&self) -> FgColorDisplay<'_, BrightBlack, Self>

Change the foreground color to bright black
§

fn on_bright_black(&self) -> BgColorDisplay<'_, BrightBlack, Self>

Change the background color to bright black
§

fn bright_red(&self) -> FgColorDisplay<'_, BrightRed, Self>

Change the foreground color to bright red
§

fn on_bright_red(&self) -> BgColorDisplay<'_, BrightRed, Self>

Change the background color to bright red
§

fn bright_green(&self) -> FgColorDisplay<'_, BrightGreen, Self>

Change the foreground color to bright green
§

fn on_bright_green(&self) -> BgColorDisplay<'_, BrightGreen, Self>

Change the background color to bright green
§

fn bright_yellow(&self) -> FgColorDisplay<'_, BrightYellow, Self>

Change the foreground color to bright yellow
§

fn on_bright_yellow(&self) -> BgColorDisplay<'_, BrightYellow, Self>

Change the background color to bright yellow
§

fn bright_blue(&self) -> FgColorDisplay<'_, BrightBlue, Self>

Change the foreground color to bright blue
§

fn on_bright_blue(&self) -> BgColorDisplay<'_, BrightBlue, Self>

Change the background color to bright blue
§

fn bright_magenta(&self) -> FgColorDisplay<'_, BrightMagenta, Self>

Change the foreground color to bright magenta
§

fn on_bright_magenta(&self) -> BgColorDisplay<'_, BrightMagenta, Self>

Change the background color to bright magenta
§

fn bright_purple(&self) -> FgColorDisplay<'_, BrightMagenta, Self>

Change the foreground color to bright purple
§

fn on_bright_purple(&self) -> BgColorDisplay<'_, BrightMagenta, Self>

Change the background color to bright purple
§

fn bright_cyan(&self) -> FgColorDisplay<'_, BrightCyan, Self>

Change the foreground color to bright cyan
§

fn on_bright_cyan(&self) -> BgColorDisplay<'_, BrightCyan, Self>

Change the background color to bright cyan
§

fn bright_white(&self) -> FgColorDisplay<'_, BrightWhite, Self>

Change the foreground color to bright white
§

fn on_bright_white(&self) -> BgColorDisplay<'_, BrightWhite, Self>

Change the background color to bright white
§

fn bold(&self) -> BoldDisplay<'_, Self>

Make the text bold
§

fn dimmed(&self) -> DimDisplay<'_, Self>

Make the text dim
§

fn italic(&self) -> ItalicDisplay<'_, Self>

Make the text italicized
§

fn underline(&self) -> UnderlineDisplay<'_, Self>

Make the text underlined
Make the text blink
Make the text blink (but fast!)
§

fn reversed(&self) -> ReversedDisplay<'_, Self>

Swap the foreground and background colors
§

fn hidden(&self) -> HiddenDisplay<'_, Self>

Hide the text
§

fn strikethrough(&self) -> StrikeThroughDisplay<'_, Self>

Cross out the text
§

fn color<Color>(&self, color: Color) -> FgDynColorDisplay<'_, Color, Self>
where Color: DynColor,

Set the foreground color at runtime. Only use if you do not know which color will be used at compile-time. If the color is constant, use either [OwoColorize::fg] or a color-specific method, such as [OwoColorize::green], Read more
§

fn on_color<Color>(&self, color: Color) -> BgDynColorDisplay<'_, Color, Self>
where Color: DynColor,

Set the background color at runtime. Only use if you do not know what color to use at compile-time. If the color is constant, use either [OwoColorize::bg] or a color-specific method, such as [OwoColorize::on_yellow], Read more
§

fn fg_rgb<const R: u8, const G: u8, const B: u8>( &self, ) -> FgColorDisplay<'_, CustomColor<R, G, B>, Self>

Set the foreground color to a specific RGB value.
§

fn bg_rgb<const R: u8, const G: u8, const B: u8>( &self, ) -> BgColorDisplay<'_, CustomColor<R, G, B>, Self>

Set the background color to a specific RGB value.
§

fn truecolor(&self, r: u8, g: u8, b: u8) -> FgDynColorDisplay<'_, Rgb, Self>

Sets the foreground color to an RGB value.
§

fn on_truecolor(&self, r: u8, g: u8, b: u8) -> BgDynColorDisplay<'_, Rgb, Self>

Sets the background color to an RGB value.
§

fn style(&self, style: Style) -> Styled<&Self>

Apply a runtime-determined style
§

impl<T> Pipe for T
where T: ?Sized,

§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
where Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
§

impl<T> Pointable for T

§

const ALIGN: usize = _

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
source§

impl<Response, Error> ResponseResult<Response, Error> for Response

source§

fn into_result(self) -> Result<Response, Error>

Converts the type into a Result that can be sent as a response.
source§

impl<T> Same for T

source§

type Output = T

Should always be Self
§

impl<St> StreamExt for St
where St: Stream + ?Sized,

§

fn next(&mut self) -> Next<'_, Self>
where Self: Unpin,

Consumes and returns the next value in the stream or None if the stream is finished. Read more
§

fn try_next<T, E>(&mut self) -> TryNext<'_, Self>
where Self: Stream<Item = Result<T, E>> + Unpin,

Consumes and returns the next item in the stream. If an error is encountered before the next item, the error is returned instead. Read more
§

fn map<T, F>(self, f: F) -> Map<Self, F>
where F: FnMut(Self::Item) -> T, Self: Sized,

Maps this stream’s items to a different type, returning a new stream of the resulting type. Read more
§

fn map_while<T, F>(self, f: F) -> MapWhile<Self, F>
where F: FnMut(Self::Item) -> Option<T>, Self: Sized,

Map this stream’s items to a different type for as long as determined by the provided closure. A stream of the target type will be returned, which will yield elements until the closure returns None. Read more
§

fn then<F, Fut>(self, f: F) -> Then<Self, Fut, F>
where F: FnMut(Self::Item) -> Fut, Fut: Future, Self: Sized,

Maps this stream’s items asynchronously to a different type, returning a new stream of the resulting type. Read more
§

fn merge<U>(self, other: U) -> Merge<Self, U>
where U: Stream<Item = Self::Item>, Self: Sized,

Combine two streams into one by interleaving the output of both as it is produced. Read more
§

fn filter<F>(self, f: F) -> Filter<Self, F>
where F: FnMut(&Self::Item) -> bool, Self: Sized,

Filters the values produced by this stream according to the provided predicate. Read more
§

fn filter_map<T, F>(self, f: F) -> FilterMap<Self, F>
where F: FnMut(Self::Item) -> Option<T>, Self: Sized,

Filters the values produced by this stream while simultaneously mapping them to a different type according to the provided closure. Read more
§

fn fuse(self) -> Fuse<Self>
where Self: Sized,

Creates a stream which ends after the first None. Read more
§

fn take(self, n: usize) -> Take<Self>
where Self: Sized,

Creates a new stream of at most n items of the underlying stream. Read more
§

fn take_while<F>(self, f: F) -> TakeWhile<Self, F>
where F: FnMut(&Self::Item) -> bool, Self: Sized,

Take elements from this stream while the provided predicate resolves to true. Read more
§

fn skip(self, n: usize) -> Skip<Self>
where Self: Sized,

Creates a new stream that will skip the n first items of the underlying stream. Read more
§

fn skip_while<F>(self, f: F) -> SkipWhile<Self, F>
where F: FnMut(&Self::Item) -> bool, Self: Sized,

Skip elements from the underlying stream while the provided predicate resolves to true. Read more
§

fn all<F>(&mut self, f: F) -> AllFuture<'_, Self, F>
where Self: Unpin, F: FnMut(Self::Item) -> bool,

Tests if every element of the stream matches a predicate. Read more
§

fn any<F>(&mut self, f: F) -> AnyFuture<'_, Self, F>
where Self: Unpin, F: FnMut(Self::Item) -> bool,

Tests if any element of the stream matches a predicate. Read more
§

fn chain<U>(self, other: U) -> Chain<Self, U>
where U: Stream<Item = Self::Item>, Self: Sized,

Combine two streams into one by first returning all values from the first stream then all values from the second stream. Read more
§

fn fold<B, F>(self, init: B, f: F) -> FoldFuture<Self, B, F>
where Self: Sized, F: FnMut(B, Self::Item) -> B,

A combinator that applies a function to every element in a stream producing a single, final value. Read more
§

fn collect<T>(self) -> Collect<Self, T>
where T: FromStream<Self::Item>, Self: Sized,

Drain stream pushing all emitted values into a collection. Read more
§

fn timeout(self, duration: Duration) -> Timeout<Self>
where Self: Sized,

Applies a per-item timeout to the passed stream. Read more
§

fn timeout_repeating(self, interval: Interval) -> TimeoutRepeating<Self>
where Self: Sized,

Applies a per-item timeout to the passed stream. Read more
§

fn throttle(self, duration: Duration) -> Throttle<Self>
where Self: Sized,

Slows down a stream by enforcing a delay between items. Read more
§

fn chunks_timeout( self, max_size: usize, duration: Duration, ) -> ChunksTimeout<Self>
where Self: Sized,

Batches the items in the given stream using a maximum duration and size for each batch. Read more
§

fn peekable(self) -> Peekable<Self>
where Self: Sized,

Turns the stream into a peekable stream, whose next element can be peeked at without being consumed. Read more
§

impl<T> StreamExt for T
where T: Stream + ?Sized,

§

fn next(&mut self) -> Next<'_, Self>
where Self: Unpin,

Creates a future that resolves to the next item in the stream. Read more
§

fn into_future(self) -> StreamFuture<Self>
where Self: Sized + Unpin,

Converts this stream into a future of (next_item, tail_of_stream). If the stream terminates, then the next item is None. Read more
§

fn map<T, F>(self, f: F) -> Map<Self, F>
where F: FnMut(Self::Item) -> T, Self: Sized,

Maps this stream’s items to a different type, returning a new stream of the resulting type. Read more
§

fn enumerate(self) -> Enumerate<Self>
where Self: Sized,

Creates a stream which gives the current iteration count as well as the next value. Read more
§

fn filter<Fut, F>(self, f: F) -> Filter<Self, Fut, F>
where F: FnMut(&Self::Item) -> Fut, Fut: Future<Output = bool>, Self: Sized,

Filters the values produced by this stream according to the provided asynchronous predicate. Read more
§

fn filter_map<Fut, T, F>(self, f: F) -> FilterMap<Self, Fut, F>
where F: FnMut(Self::Item) -> Fut, Fut: Future<Output = Option<T>>, Self: Sized,

Filters the values produced by this stream while simultaneously mapping them to a different type according to the provided asynchronous closure. Read more
§

fn then<Fut, F>(self, f: F) -> Then<Self, Fut, F>
where F: FnMut(Self::Item) -> Fut, Fut: Future, Self: Sized,

Computes from this stream’s items new items of a different type using an asynchronous closure. Read more
§

fn collect<C>(self) -> Collect<Self, C>
where C: Default + Extend<Self::Item>, Self: Sized,

Transforms a stream into a collection, returning a future representing the result of that computation. Read more
§

fn unzip<A, B, FromA, FromB>(self) -> Unzip<Self, FromA, FromB>
where FromA: Default + Extend<A>, FromB: Default + Extend<B>, Self: Sized + Stream<Item = (A, B)>,

Converts a stream of pairs into a future, which resolves to pair of containers. Read more
§

fn concat(self) -> Concat<Self>
where Self: Sized, Self::Item: Extend<<Self::Item as IntoIterator>::Item> + IntoIterator + Default,

Concatenate all items of a stream into a single extendable destination, returning a future representing the end result. Read more
§

fn count(self) -> Count<Self>
where Self: Sized,

Drives the stream to completion, counting the number of items. Read more
§

fn cycle(self) -> Cycle<Self>
where Self: Sized + Clone,

Repeats a stream endlessly. Read more
§

fn fold<T, Fut, F>(self, init: T, f: F) -> Fold<Self, Fut, T, F>
where F: FnMut(T, Self::Item) -> Fut, Fut: Future<Output = T>, Self: Sized,

Execute an accumulating asynchronous computation over a stream, collecting all the values into one final result. Read more
§

fn any<Fut, F>(self, f: F) -> Any<Self, Fut, F>
where F: FnMut(Self::Item) -> Fut, Fut: Future<Output = bool>, Self: Sized,

Execute predicate over asynchronous stream, and return true if any element in stream satisfied a predicate. Read more
§

fn all<Fut, F>(self, f: F) -> All<Self, Fut, F>
where F: FnMut(Self::Item) -> Fut, Fut: Future<Output = bool>, Self: Sized,

Execute predicate over asynchronous stream, and return true if all element in stream satisfied a predicate. Read more
§

fn flatten(self) -> Flatten<Self>
where Self::Item: Stream, Self: Sized,

Flattens a stream of streams into just one continuous stream. Read more
§

fn flatten_unordered( self, limit: impl Into<Option<usize>>, ) -> FlattenUnorderedWithFlowController<Self, ()>
where Self::Item: Stream + Unpin, Self: Sized,

Flattens a stream of streams into just one continuous stream. Polls inner streams produced by the base stream concurrently. Read more
§

fn flat_map<U, F>(self, f: F) -> FlatMap<Self, U, F>
where F: FnMut(Self::Item) -> U, U: Stream, Self: Sized,

Maps a stream like [StreamExt::map] but flattens nested Streams. Read more
§

fn flat_map_unordered<U, F>( self, limit: impl Into<Option<usize>>, f: F, ) -> FlatMapUnordered<Self, U, F>
where U: Stream + Unpin, F: FnMut(Self::Item) -> U, Self: Sized,

Maps a stream like [StreamExt::map] but flattens nested Streams and polls them concurrently, yielding items in any order, as they made available. Read more
§

fn scan<S, B, Fut, F>(self, initial_state: S, f: F) -> Scan<Self, S, Fut, F>
where F: FnMut(&mut S, Self::Item) -> Fut, Fut: Future<Output = Option<B>>, Self: Sized,

Combinator similar to [StreamExt::fold] that holds internal state and produces a new stream. Read more
§

fn skip_while<Fut, F>(self, f: F) -> SkipWhile<Self, Fut, F>
where F: FnMut(&Self::Item) -> Fut, Fut: Future<Output = bool>, Self: Sized,

Skip elements on this stream while the provided asynchronous predicate resolves to true. Read more
§

fn take_while<Fut, F>(self, f: F) -> TakeWhile<Self, Fut, F>
where F: FnMut(&Self::Item) -> Fut, Fut: Future<Output = bool>, Self: Sized,

Take elements from this stream while the provided asynchronous predicate resolves to true. Read more
§

fn take_until<Fut>(self, fut: Fut) -> TakeUntil<Self, Fut>
where Fut: Future, Self: Sized,

Take elements from this stream until the provided future resolves. Read more
§

fn for_each<Fut, F>(self, f: F) -> ForEach<Self, Fut, F>
where F: FnMut(Self::Item) -> Fut, Fut: Future<Output = ()>, Self: Sized,

Runs this stream to completion, executing the provided asynchronous closure for each element on the stream. Read more
§

fn for_each_concurrent<Fut, F>( self, limit: impl Into<Option<usize>>, f: F, ) -> ForEachConcurrent<Self, Fut, F>
where F: FnMut(Self::Item) -> Fut, Fut: Future<Output = ()>, Self: Sized,

Runs this stream to completion, executing the provided asynchronous closure for each element on the stream concurrently as elements become available. Read more
§

fn take(self, n: usize) -> Take<Self>
where Self: Sized,

Creates a new stream of at most n items of the underlying stream. Read more
§

fn skip(self, n: usize) -> Skip<Self>
where Self: Sized,

Creates a new stream which skips n items of the underlying stream. Read more
§

fn fuse(self) -> Fuse<Self>
where Self: Sized,

Fuse a stream such that poll_next will never again be called once it has finished. This method can be used to turn any Stream into a FusedStream. Read more
§

fn by_ref(&mut self) -> &mut Self

Borrows a stream, rather than consuming it. Read more
§

fn catch_unwind(self) -> CatchUnwind<Self>
where Self: Sized + UnwindSafe,

Catches unwinding panics while polling the stream. Read more
§

fn boxed<'a>(self) -> Pin<Box<dyn Stream<Item = Self::Item> + Send + 'a>>
where Self: Sized + Send + 'a,

Wrap the stream in a Box, pinning it. Read more
§

fn boxed_local<'a>(self) -> Pin<Box<dyn Stream<Item = Self::Item> + 'a>>
where Self: Sized + 'a,

Wrap the stream in a Box, pinning it. Read more
§

fn buffered(self, n: usize) -> Buffered<Self>
where Self::Item: Future, Self: Sized,

An adaptor for creating a buffered list of pending futures. Read more
§

fn buffer_unordered(self, n: usize) -> BufferUnordered<Self>
where Self::Item: Future, Self: Sized,

An adaptor for creating a buffered list of pending futures (unordered). Read more
§

fn zip<St>(self, other: St) -> Zip<Self, St>
where St: Stream, Self: Sized,

An adapter for zipping two streams together. Read more
§

fn chain<St>(self, other: St) -> Chain<Self, St>
where St: Stream<Item = Self::Item>, Self: Sized,

Adapter for chaining two streams. Read more
§

fn peekable(self) -> Peekable<Self>
where Self: Sized,

Creates a new stream which exposes a peek method. Read more
§

fn chunks(self, capacity: usize) -> Chunks<Self>
where Self: Sized,

An adaptor for chunking up items of the stream inside a vector. Read more
§

fn ready_chunks(self, capacity: usize) -> ReadyChunks<Self>
where Self: Sized,

An adaptor for chunking up ready items of the stream inside a vector. Read more
§

fn forward<S>(self, sink: S) -> Forward<Self, S>
where S: Sink<Self::Ok, Error = Self::Error>, Self: Sized + TryStream,

A future that completes after the given stream has been fully processed into the sink and the sink has been flushed and closed. Read more
§

fn split<Item>(self) -> (SplitSink<Self, Item>, SplitStream<Self>)
where Self: Sized + Sink<Item>,

Splits this Stream + Sink object into separate Sink and Stream objects. Read more
§

fn inspect<F>(self, f: F) -> Inspect<Self, F>
where F: FnMut(&Self::Item), Self: Sized,

Do something with each item of this stream, afterwards passing it on. Read more
§

fn left_stream<B>(self) -> Either<Self, B>
where B: Stream<Item = Self::Item>, Self: Sized,

Wrap this stream in an Either stream, making it the left-hand variant of that Either. Read more
§

fn right_stream<B>(self) -> Either<B, Self>
where B: Stream<Item = Self::Item>, Self: Sized,

Wrap this stream in an Either stream, making it the right-hand variant of that Either. Read more
§

fn poll_next_unpin(&mut self, cx: &mut Context<'_>) -> Poll<Option<Self::Item>>
where Self: Unpin,

A convenience method for calling [Stream::poll_next] on Unpin stream types.
§

fn select_next_some(&mut self) -> SelectNextSome<'_, Self>
where Self: Unpin + FusedStream,

Returns a Future that resolves when the next item in this stream is ready. Read more
§

impl<T> Tap for T

§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
§

impl<T> TryConv for T

§

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

source§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<S, T, E> TryStream for S
where S: Stream<Item = Result<T, E>> + ?Sized,

§

type Ok = T

The type of successful values yielded by this future
§

type Error = E

The type of failures yielded by this future
§

fn try_poll_next( self: Pin<&mut S>, cx: &mut Context<'_>, ) -> Poll<Option<Result<<S as TryStream>::Ok, <S as TryStream>::Error>>>

Poll this TryStream as if it were a Stream. Read more
§

impl<S> TryStreamExt for S
where S: TryStream + ?Sized,

§

fn err_into<E>(self) -> ErrInto<Self, E>
where Self: Sized, Self::Error: Into<E>,

Wraps the current stream in a new stream which converts the error type into the one provided. Read more
§

fn map_ok<T, F>(self, f: F) -> MapOk<Self, F>
where Self: Sized, F: FnMut(Self::Ok) -> T,

Wraps the current stream in a new stream which maps the success value using the provided closure. Read more
§

fn map_err<E, F>(self, f: F) -> MapErr<Self, F>
where Self: Sized, F: FnMut(Self::Error) -> E,

Wraps the current stream in a new stream which maps the error value using the provided closure. Read more
§

fn and_then<Fut, F>(self, f: F) -> AndThen<Self, Fut, F>
where F: FnMut(Self::Ok) -> Fut, Fut: TryFuture<Error = Self::Error>, Self: Sized,

Chain on a computation for when a value is ready, passing the successful results to the provided closure f. Read more
§

fn or_else<Fut, F>(self, f: F) -> OrElse<Self, Fut, F>
where F: FnMut(Self::Error) -> Fut, Fut: TryFuture<Ok = Self::Ok>, Self: Sized,

Chain on a computation for when an error happens, passing the erroneous result to the provided closure f. Read more
§

fn inspect_ok<F>(self, f: F) -> InspectOk<Self, F>
where F: FnMut(&Self::Ok), Self: Sized,

Do something with the success value of this stream, afterwards passing it on. Read more
§

fn inspect_err<F>(self, f: F) -> InspectErr<Self, F>
where F: FnMut(&Self::Error), Self: Sized,

Do something with the error value of this stream, afterwards passing it on. Read more
§

fn into_stream(self) -> IntoStream<Self>
where Self: Sized,

Wraps a [TryStream] into a type that implements Stream Read more
§

fn try_next(&mut self) -> TryNext<'_, Self>
where Self: Unpin,

Creates a future that attempts to resolve the next item in the stream. If an error is encountered before the next item, the error is returned instead. Read more
§

fn try_for_each<Fut, F>(self, f: F) -> TryForEach<Self, Fut, F>
where F: FnMut(Self::Ok) -> Fut, Fut: TryFuture<Ok = (), Error = Self::Error>, Self: Sized,

Attempts to run this stream to completion, executing the provided asynchronous closure for each element on the stream. Read more
§

fn try_skip_while<Fut, F>(self, f: F) -> TrySkipWhile<Self, Fut, F>
where F: FnMut(&Self::Ok) -> Fut, Fut: TryFuture<Ok = bool, Error = Self::Error>, Self: Sized,

Skip elements on this stream while the provided asynchronous predicate resolves to true. Read more
§

fn try_take_while<Fut, F>(self, f: F) -> TryTakeWhile<Self, Fut, F>
where F: FnMut(&Self::Ok) -> Fut, Fut: TryFuture<Ok = bool, Error = Self::Error>, Self: Sized,

Take elements on this stream while the provided asynchronous predicate resolves to true. Read more
§

fn try_for_each_concurrent<Fut, F>( self, limit: impl Into<Option<usize>>, f: F, ) -> TryForEachConcurrent<Self, Fut, F>
where F: FnMut(Self::Ok) -> Fut, Fut: Future<Output = Result<(), Self::Error>>, Self: Sized,

Attempts to run this stream to completion, executing the provided asynchronous closure for each element on the stream concurrently as elements become available, exiting as soon as an error occurs. Read more
§

fn try_collect<C>(self) -> TryCollect<Self, C>
where C: Default + Extend<Self::Ok>, Self: Sized,

Attempt to transform a stream into a collection, returning a future representing the result of that computation. Read more
§

fn try_chunks(self, capacity: usize) -> TryChunks<Self>
where Self: Sized,

An adaptor for chunking up successful items of the stream inside a vector. Read more
§

fn try_ready_chunks(self, capacity: usize) -> TryReadyChunks<Self>
where Self: Sized,

An adaptor for chunking up successful, ready items of the stream inside a vector. Read more
§

fn try_filter<Fut, F>(self, f: F) -> TryFilter<Self, Fut, F>
where Fut: Future<Output = bool>, F: FnMut(&Self::Ok) -> Fut, Self: Sized,

Attempt to filter the values produced by this stream according to the provided asynchronous closure. Read more
§

fn try_filter_map<Fut, F, T>(self, f: F) -> TryFilterMap<Self, Fut, F>
where Fut: TryFuture<Ok = Option<T>, Error = Self::Error>, F: FnMut(Self::Ok) -> Fut, Self: Sized,

Attempt to filter the values produced by this stream while simultaneously mapping them to a different type according to the provided asynchronous closure. Read more
§

fn try_flatten_unordered( self, limit: impl Into<Option<usize>>, ) -> TryFlattenUnordered<Self>
where Self::Ok: TryStream + Unpin, <Self::Ok as TryStream>::Error: From<Self::Error>, Self: Sized,

Flattens a stream of streams into just one continuous stream. Produced streams will be polled concurrently and any errors will be passed through without looking at them. If the underlying base stream returns an error, it will be immediately propagated. Read more
§

fn try_flatten(self) -> TryFlatten<Self>
where Self::Ok: TryStream, <Self::Ok as TryStream>::Error: From<Self::Error>, Self: Sized,

Flattens a stream of streams into just one continuous stream. Read more
§

fn try_fold<T, Fut, F>(self, init: T, f: F) -> TryFold<Self, Fut, T, F>
where F: FnMut(T, Self::Ok) -> Fut, Fut: TryFuture<Ok = T, Error = Self::Error>, Self: Sized,

Attempt to execute an accumulating asynchronous computation over a stream, collecting all the values into one final result. Read more
§

fn try_concat(self) -> TryConcat<Self>
where Self: Sized, Self::Ok: Extend<<Self::Ok as IntoIterator>::Item> + IntoIterator + Default,

Attempt to concatenate all items of a stream into a single extendable destination, returning a future representing the end result. Read more
§

fn try_buffer_unordered(self, n: usize) -> TryBufferUnordered<Self>
where Self::Ok: TryFuture<Error = Self::Error>, Self: Sized,

Attempt to execute several futures from a stream concurrently (unordered). Read more
§

fn try_buffered(self, n: usize) -> TryBuffered<Self>
where Self::Ok: TryFuture<Error = Self::Error>, Self: Sized,

Attempt to execute several futures from a stream concurrently. Read more
§

fn try_poll_next_unpin( &mut self, cx: &mut Context<'_>, ) -> Poll<Option<Result<Self::Ok, Self::Error>>>
where Self: Unpin,

A convenience method for calling [TryStream::try_poll_next] on Unpin stream types.
§

fn into_async_read(self) -> IntoAsyncRead<Self>
where Self: Sized + TryStreamExt<Error = Error>, Self::Ok: AsRef<[u8]>,

Adapter that converts this stream into an AsyncBufRead. Read more
§

fn try_all<Fut, F>(self, f: F) -> TryAll<Self, Fut, F>
where Self: Sized, F: FnMut(Self::Ok) -> Fut, Fut: Future<Output = bool>,

Attempt to execute a predicate over an asynchronous stream and evaluate if all items satisfy the predicate. Exits early if an Err is encountered or if an Ok item is found that does not satisfy the predicate. Read more
§

fn try_any<Fut, F>(self, f: F) -> TryAny<Self, Fut, F>
where Self: Sized, F: FnMut(Self::Ok) -> Fut, Fut: Future<Output = bool>,

Attempt to execute a predicate over an asynchronous stream and evaluate if any items satisfy the predicate. Exits early if an Err is encountered or if an Ok item is found that satisfies the predicate. Read more
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more
source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more