Struct zebra_chain::amount::Amount

pub struct Amount<C = NegativeAllowed>(i64, PhantomData<C>);

A runtime validated type for representing amounts of zatoshis

Tuple Fields

0: i64

The inner amount value.

1: PhantomData<C>

Used for Constraint type inference.

Correctness

This internal Zebra marker type is not consensus-critical. And it should be ignored during testing. (And other internal uses.)

Implementations

impl<C> Amount<C>

pub fn constrain<C2>(self) -> Result<Amount<C2>>

where C2: Constraint,

Convert this amount to a different Amount type if it satisfies the new constraint

pub fn zatoshis(&self) -> i64

Returns the number of zatoshis in this amount.

pub fn to_bytes(&self) -> [u8; 8]

To little endian byte array

pub fn from_bytes(bytes: [u8; 8]) -> Result<Amount<C>>

where C: Constraint,

From little endian byte array

pub fn zero() -> Amount<C>

where C: Constraint,

Create a zero Amount

Trait Implementations

impl<C> Add<Amount<C>> for Result<Amount<C>>

where C: Constraint,

type Output = Result<Amount<C>, Error>

The resulting type after applying the + operator.

fn add(self, rhs: Amount<C>) -> Self::Output

Performs the + operation.

impl<C> Add<Result<Amount<C>, Error>> for Amount<C>

where C: Constraint,

type Output = Result<Amount<C>, Error>

The resulting type after applying the + operator.

fn add(self, rhs: Result<Amount<C>>) -> Self::Output

Performs the + operation.

impl<C> Add for Amount<C>

where C: Constraint,

type Output = Result<Amount<C>, Error>

The resulting type after applying the + operator.

fn add(self, rhs: Amount<C>) -> Self::Output

Performs the + operation.

impl<C> AddAssign<Amount<C>> for Result<Amount<C>>

where Amount<C>: Copy, C: Constraint,

fn add_assign(&mut self, rhs: Amount<C>)

Performs the += operation.

impl<C> Arbitrary for Amount<C>

where C: Constraint + Debug,

type Parameters = ()

The type of parameters that arbitrary_with accepts for configuration of the generated Strategy. Parameters must implement Default.

fn arbitrary_with(_args: Self::Parameters) -> Self::Strategy

Generates a Strategy for producing arbitrary values of type the implementing type (Self). The strategy is passed the arguments given in args.

type Strategy = BoxedStrategy<Amount<C>>

The type of Strategy used to generate values of type Self.

fn arbitrary() -> Self::Strategy

Generates a Strategy for producing arbitrary values of type the implementing type (Self).

impl<C: Clone> Clone for Amount<C>

fn clone(&self) -> Amount<C>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<C> Debug for Amount<C>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<C: Default> Default for Amount<C>

fn default() -> Amount<C>

Returns the “default value” for a type.

impl<'de, C> Deserialize<'de> for Amount<C>

where C: Constraint + Clone,

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl<C> Display for Amount<C>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<C> Div<u64> for Amount<C>

where C: Constraint,

type Output = Result<Amount<C>, Error>

The resulting type after applying the / operator.

fn div(self, rhs: u64) -> Self::Output

Performs the / operation.

impl<C> From<Amount<C>> for Scalar

fn from(a: Amount<C>) -> Scalar

Converts to this type from the input type.

impl<C> From<Amount<C>> for Fr

fn from(a: Amount<C>) -> Fr

Converts to this type from the input type.

impl<C> From<Amount<C>> for i64

fn from(amount: Amount<C>) -> Self

Converts to this type from the input type.

impl From<Amount<NonNegative>> for u64

fn from(amount: Amount<NonNegative>) -> Self

Converts to this type from the input type.

impl<C> Hash for Amount<C>

fn hash<H: Hasher>(&self, state: &mut H)

Amounts with the same value are equal, even if they have different constraints

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl<C> Mul<Amount<C>> for u64

where C: Constraint,

type Output = Result<Amount<C>, Error>

The resulting type after applying the * operator.

fn mul(self, rhs: Amount<C>) -> Self::Output

Performs the * operation.

impl<C> Mul<u64> for Amount<C>

where C: Constraint,

type Output = Result<Amount<C>, Error>

The resulting type after applying the * operator.

fn mul(self, rhs: u64) -> Self::Output

Performs the * operation.

impl<C> Neg for Amount<C>

where C: Constraint,

type Output = Amount

The resulting type after applying the - operator.

fn neg(self) -> Self::Output

Performs the unary - operation.

impl<C> Ord for Amount<C>

fn cmp(&self, other: &Amount<C>) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized + PartialOrd,

Restrict a value to a certain interval.

impl<C> PartialEq<Amount<C>> for i64

fn eq(&self, other: &Amount<C>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<C1, C2> PartialEq<Amount<C2>> for Amount<C1>

fn eq(&self, other: &Amount<C2>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<C> PartialEq<i64> for Amount<C>

fn eq(&self, other: &i64) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<C1, C2> PartialOrd<Amount<C2>> for Amount<C1>

fn partial_cmp(&self, other: &Amount<C2>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<C> Serialize for Amount<C>

where C: Constraint + Clone,

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.

impl<C> Sub<Amount<C>> for Result<Amount<C>>

where C: Constraint,

type Output = Result<Amount<C>, Error>

The resulting type after applying the - operator.

fn sub(self, rhs: Amount<C>) -> Self::Output

Performs the - operation.

impl<C> Sub<Result<Amount<C>, Error>> for Amount<C>

where C: Constraint,

type Output = Result<Amount<C>, Error>

The resulting type after applying the - operator.

fn sub(self, rhs: Result<Amount<C>>) -> Self::Output

Performs the - operation.

impl<C> Sub for Amount<C>

where C: Constraint,

type Output = Result<Amount<C>, Error>

The resulting type after applying the - operator.

fn sub(self, rhs: Amount<C>) -> Self::Output

Performs the - operation.

impl<C> SubAssign<Amount<C>> for Result<Amount<C>>

where Amount<C>: Copy, C: Constraint,

fn sub_assign(&mut self, rhs: Amount<C>)

Performs the -= operation.

impl<'amt, C> Sum<&'amt Amount<C>> for Result<Amount<C>>

where C: Constraint + Copy + 'amt,

fn sum<I: Iterator<Item = &'amt Amount<C>>>(iter: I) -> Self

Takes an iterator and generates Self from the elements by “summing up” the items.

impl<C> Sum<Amount<C>> for Result<Amount<C>>

where C: Constraint,

fn sum<I: Iterator<Item = Amount<C>>>(iter: I) -> Self

Takes an iterator and generates Self from the elements by “summing up” the items.

impl TryFrom<Amount<NonNegative>> for NonNegativeAmount

Convert a Zebra non-negative Amount into a librustzcash one.

type Error = BalanceError

The type returned in the event of a conversion error.

fn try_from(amount: Amount<NonNegative>) -> Result<Self, Self::Error>

Performs the conversion.

impl<C> TryFrom<i128> for Amount<C>

where C: Constraint,

Conversion from i128 to Amount.

Used to handle the result of multiplying negative Amounts by u64.

type Error = Error

The type returned in the event of a conversion error.

fn try_from(value: i128) -> Result<Self, Self::Error>

Performs the conversion.

impl<C> TryFrom<i32> for Amount<C>

where C: Constraint,

type Error = Error

The type returned in the event of a conversion error.

fn try_from(value: i32) -> Result<Self, Self::Error>

Performs the conversion.

impl<C> TryFrom<i64> for Amount<C>

where C: Constraint,

type Error = Error

The type returned in the event of a conversion error.

fn try_from(value: i64) -> Result<Self, Self::Error>

Performs the conversion.

impl<C> TryFrom<u64> for Amount<C>

where C: Constraint,

type Error = Error

The type returned in the event of a conversion error.

fn try_from(value: u64) -> Result<Self, Self::Error>

Performs the conversion.

impl ZcashDeserialize for Amount<NegativeAllowed>

fn zcash_deserialize<R: Read>(reader: R) -> Result<Self, SerializationError>

Try to read self from the given reader.

impl ZcashDeserialize for Amount<NonNegative>

fn zcash_deserialize<R: Read>(reader: R) -> Result<Self, SerializationError>

Try to read self from the given reader.

impl ZcashSerialize for Amount<NegativeAllowed>

fn zcash_serialize<W: Write>(&self, writer: W) -> Result<(), Error>

Write self to the given writer using the canonical format.

fn zcash_serialize_to_vec(&self) -> Result<Vec<u8>, Error>

Helper function to construct a vec to serialize the current struct into

fn zcash_serialized_size(&self) -> usize

Get the size of self by using a fake writer.

impl ZcashSerialize for Amount<NonNegative>

fn zcash_serialize<W: Write>(&self, writer: W) -> Result<(), Error>

Write self to the given writer using the canonical format.

fn zcash_serialize_to_vec(&self) -> Result<Vec<u8>, Error>

Helper function to construct a vec to serialize the current struct into

fn zcash_serialized_size(&self) -> usize

Get the size of self by using a fake writer.

impl<C: Copy> Copy for Amount<C>

impl<C> Eq for Amount<C>